General Service Control Valves

Our standard offering includes several styles of globe and angle valve styles. The G110 Series provides cage-guided valves through 16” and ANSI Class 600. For higher pressure ratings, we offer the V510 and V520 valves for coverage through ANSI Class 2500. For services requiring top-guided trims, we offer the G120 with threaded-in seat ring and the G130 with ‘quick change trim’. For larger dirty services, our V800 Series delivers rugged top and bottom guiding.
.

Series G110 Globe and Angle Valves
1-1/2" through 16" ANSI Class 150, 300, 600

The G110 Series offers cage-guided balanced plugs to allow for smaller actuators. This design allows for the use of multi-hole trims to reduce aerodynamic noise and the onset of cavitation. A variety of plug seals are available to meet a wide range of application conditions offering up to class VI shut-off. Unbalanced plugs are available for those conditions exceeding the seal ring capabilities. The G110 cage-guided trim style is ideal for clean liquids, gases and steam in moderate to high temperatures and pressures. For detailed specifications, please refer to product bulletin G110-1.

Series G120 Globe and Angle Valves
1/2" through 6" ANSI Class 150, 300, 600

The thread retained seat ring of the G120 eliminates concern over thermal expansion and the need for elastomeric gaskets. This design utilizes a single metallic gasket at the body to bonnet interface. This all metal construction makes this design desirable for many chemical applications. The geometry of the trim components simplifies manufacturing when high alloy materials are required. The 1/2" - 1" valves are available with spline trims for precise control of extreme low flow applications. A variety of extension and bellows seal bonnet options further enhance this product’s capability in chemical applications. For detailed specifications, please refer to product bulletin G120-1.

Series G130 Globe and Angle Valves
1/2" through 6" ANSI Class 150, 300, 600

The G130 Series is a single-seated, top-guided control valve with “quick change” trim. The seat ring is held in place by a retainer which is captured between the valve body and bonnet. No special tools are required for the removal or replacement of the seat ring. The G130 is often the first choice for the widest range of medias, temperatures and pressures. For detailed specifications, please refer to product bulletin G130-1.

Series V510/V520 Globe and Angle Valves
1/2" through 12" ANSI Class 900, 1500, 2500

The V510 (ANSI Class 900 and 1500) and V520 (ANSI Class 2500) Series control valves are heavy cage guided type globe and angle valves with “quick change” trim. Designed for high temperature and high pressure applications, these valves feature a close tolerance integral cage and seat ring for accurate, vibration free service. The pressure drop in this design occurs across the cage openings (ports) rather than the seating surface, thus minimizing seat wear and seat leakage. Applications include throttling and on/off control of non-gritty liquids, gases, and steam at moderate to high temperature and pressures. For detailed specifications, please refer to the product bulletin V510/520-1.

Series V800/V801 Top and Bottom Guided Double Seated Globe Valve
1” through 12” ANSI Class 150, 300, 600, 900,1500

The V800/801 Series is a double-seated, top and bottom guided globe-style valve with screwed-in seat rings. This style of valve is extremely useful in erosive (dirty) fluids and systems where high flow rates are required. This valve style may be ordered as air to open or air to close without a change in actuator. For detailed specifications, please refer to the product bulletin V800-1. (No link, bulletin not yet available.)